alm-busy-circuits/tangle-quartet
Tangle Quartet
Capabilities 2
Jacks 13 — 8 in / 5 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (8) | |||
| CH1 CV | cv | — | CV level input; normalled to +5V when unpatched, enabling manual amplitude control via the attenuator knob alone.580 |
| CH1 In | mixed | — | DC-coupled signal input; accepts audio or CV signals.580 |
| CH2 CV | cv | — | CV level input; normalled to +5V when unpatched, enabling manual amplitude control via the attenuator knob alone.580 |
| CH2 In | mixed | — | DC-coupled signal input; accepts audio or CV signals.580 |
| CH3 CV | cv | — | CV level input; normalled to +5V when unpatched, enabling manual amplitude control via the attenuator knob alone.580 |
| CH3 In | mixed | — | DC-coupled signal input; accepts audio or CV signals.580 |
| CH4 CV | cv | — | CV level input; normalled to +5V when unpatched, enabling manual amplitude control via the attenuator knob alone.580 |
| CH4 In | mixed | — | DC-coupled signal input; accepts audio or CV signals.580 |
| Outputs (5) | |||
| CH1 Out | mixed | — | Individual VCA output for channel 1. When patched, this channel's signal is removed from the Mix output.580 |
| CH2 Out | mixed | — | Individual VCA output for channel 2. When patched, this channel's signal is removed from the Mix output.580 |
| CH3 Out | mixed | — | Individual VCA output for channel 3. When patched, this channel's signal is removed from the Mix output.580 |
| CH4 Out | mixed | — | Individual VCA output for channel 4. When patched, this channel's signal is removed from the Mix output.580 |
| Mix | mixed | — | Combined output that sums all channels whose individual outputs are not patched.580 |
Parameters 4
| Name | Type | Range | Behavior |
|---|---|---|---|
| CH1 Level | knob | — | Attenuates the CV level input for channel 1. Fully CW with +5V CV gives unity gain; fully CCW or 0V CV gives zero output. CV above 5V amplifies the signal. The LED indicates post-attenuation CV level.580 |
| CH2 Level | knob | — | Attenuates the CV level input for channel 2. Fully CW with +5V CV gives unity gain; fully CCW or 0V CV gives zero output. CV above 5V amplifies the signal. The LED indicates post-attenuation CV level.580 |
| CH3 Level | knob | — | Attenuates the CV level input for channel 3. Fully CW with +5V CV gives unity gain; fully CCW or 0V CV gives zero output. CV above 5V amplifies the signal. The LED indicates post-attenuation CV level.580 |
| CH4 Level | knob | — | Attenuates the CV level input for channel 4. Fully CW with +5V CV gives unity gain; fully CCW or 0V CV gives zero output. CV above 5V amplifies the signal. The LED indicates post-attenuation CV level.580 |
Firmware history 0 versions
No firmware history recorded.
References 2
-
[580]
ALM-009 Tangle Quartet Operation Manualmanual● verified 2026-05-21
- [581]