bastl-instruments/neo-trinity
Neo Trinity
Capabilities 5
- CV Sequencer (Chain)cv-sequencer
- 6 independent channels can each record knob movements and create pitch/gate sequences. Automation sequences of 2–64 steps, with clock-quantized or non-quantized recording and algorithmic fill generators.193
- Clock Sourceclock-source
- Internal clock generator with 35–420 BPM range, tap tempo, and CLK IN/OUT for external sync. Supports clock division (up to /8) and multiplication (up to x4) with odd-factor substeps.193
- Envelope Generatorenvelope-generator
- 6 independent channels can each be set to ENV mode with 4 shapes (decay, variable, attack, pulse), retrigger control, slew/AR mode, and 1ms–8s range.193
- LFOlfo
- 6 independent channels can each be set to LFO mode with 5 shapes (saw, triangle/sine, ramp, pulse, random), smoothing, sync to clock, and rate range of 260s to 180Hz.193
- Quantizerquantizer
- CV mode includes a quantizer with 8 scales, 2V or 5V range, and smooth interpolation option. Can process external CV via META IN or IN E/F inputs.193
Jacks 7 — 5 in / 2 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (5) | |||
| CLK IN | clock | — | Receives external clock. Maximum accepted frequency is 50Hz. When connected, module operates in external CLK mode as divider/multiplier.193 |
| IN E | cv | — | 193 |
| IN F | cv | — | 193 |
| META IN | cv | — | Assignable CV input affecting some, none, or all channels. Multiple input modes: regular, regular attenuated, inverted, inverted attenuated, VCA, TRIG, and Sample & Hold. Updated at 4kHz.193 |
| RESET | trigger | — | 193 |
| Outputs (2) | |||
| CLK OUT | clock | 0V to 5V | 193 |
| Channel Outputs (A-F) | cv | -5V to 5V | 6 channel outputs updated at 4kHz. Bipolar mode: -5V to +5V; unipolar mode: 0V to +5V. LEDs indicate voltage polarity and intensity (green=positive, red=negative). Can be calibrated for V/OCT accuracy.193 |
Parameters 13
| Name | Type | Range | Behavior |
|---|---|---|---|
| Automation Length | menu_setting | 2steps – 64steps | 193 |
| CV Quantization | menu_setting | — | Toggles quantization ON/OFF and selects from 8 scales. D button toggles quantization, A selects major/minor, B&C combinations select scale type. More lit buttons = more notes in the scale.193 |
| CV Range | menu_setting | — | 193 |
| Channel Mode | menu_setting | — | 193 |
| ENV Duration | menu_setting | 1ms – 8000ms | 193 |
| ENV Shape | menu_setting | — | 193 |
| Input Mode | menu_setting | — | 193 |
| Internal CLK BPM | menu_setting | 35BPM – 420BPM | 193 |
| LFO Rate | menu_setting | 0.00385Hz – 180Hz | Controls the speed of the LFO from 260 seconds per cycle up to 180Hz. When synced to clock, the RATE knob sets the clock divider.193 |
| LFO Shape | menu_setting | — | 193 |
| MODE | button | — | Cycles through LFO, ENV, and CV modes for the selected channel. In the CLK channel, starts/stops the clock. Also used to cycle through input modes when held with channel buttons.193 |
| RATE | knob | — | Sets the main variable of the selected channel: LFO speed (or clock divider when synced), envelope duration/shape, or output voltage in CV mode. Can be automated by holding REC and turning the knob. Turning the RATE knob after recording offsets the recorded sequence; center position maintains original automation.193 |
| Unipolar/Bipolar | menu_setting | — | Sets each channel output to bipolar (-5V to +5V) or unipolar (0V to +5V). Note: in ENV mode, envelopes are always unipolar and cannot be switched to bipolar.193 |
Firmware history 2 versions
| Version | Released | Notes |
|---|---|---|
| 1.1 | — | 193 |
| 1.0 | — | 193 |
References 2
- [193]
-
[194]
Bastl Neo Trinity product pageproduct_page⚠ verified 2026-05-06 · manufacturer changed since last verified