| AMP ATTACK | knob | — | 213 |
| AMP DECAY | knob | — | In loop mode, decay defines the time for the loop to fade out. Default is 100 (sample plays full length) for infinite looping.213 |
| AMP HOLD | knob | — | 213 |
| AMP RANGE | knob | — | Selects the envelope time range: SHORT (max 1s), MID (max 3s), LONG (max 10s), or RELATIVE (attack/hold/decay auto-scaled to sample/slice length).213 |
| CV input range | menu_setting | -5V – 5V | Configurable CV input range. Available ranges: -5V~+5V, -10V~+10V, 0~+5V, 0~+10V, 1V/Oct.213 |
| DISPLAY CONTRAST | menu_setting | — | 213 |
| END | knob | — | Sets the sample playback end point.213 |
| FX MIX | knob | — | Controls dry/wet mix of the effect. For filter effects, must be set to full wet to fully hear the effect.213 |
| FX PARAM1 | knob | — | 213 |
| FX PARAM2 | knob | — | 213 |
| FX TYPE | knob | — | Selects the effect applied to the sample. Options: DELAY, REVERB, LOWPASS FILTER, HIGHPASS FILTER, BITCRUSH, FOLD, DRIVE, NONE (bypass).213 |
| LOOP | knob | — | Sets the loop point. In loop mode, playback goes from start to end then loops between start and loop points.213 |
| OUT1 LVL | menu_setting | ≤100 | Sets output level for channel 1. Maximum setting (100) sets output level to 10Vptp.213 |
| OUT2 LVL | menu_setting | ≤100 | 213 |
| START | knob | — | Sets the sample playback start point.213 |
| Slice count | knob | 1 – 32 | 213 |
| Slice playback mode | knob | — | Selects slice playback order: FWD (left to right), BKW (right to left), RND (random), CV (CV-controlled, trigger required), or NONE (first slice only).213 |
| TR1 DELAY | menu_setting | — | Delays incoming trigger 1 signal to compensate for sequencer latency. Adjust to find timing sweet spot.213 |
| TR2 DELAY | menu_setting | — | 213 |
| TRG1 | button | — | Manual trigger button for channel 1. In performance mode, triggers sample playback for channel 1.213 |
| TRG2/SHIFT | button | — | Manual trigger button for channel 2, and also serves as the SHIFT button to access secondary functions. Manual trigger only works in performance mode.213 |
| TUNE | knob | — | Controls playback tuning. Supports 1V/oct tracking. Initial tuning expressed relative to A4 (meaning the sample plays at its original recorded tuning). Pressing TRG2/SHIFT while turning changes tuning in semitone steps vs cents.213 |