intellijel/aux-mix-1u
Aux Mix 1U
3-channel stereo mixer module with a stereo auxiliary (Aux) send bus. Designed for audio signals only (not CV). AC-coupled with audio-grade logarithmic attenuators. Channels 1 and 2 have Aux Level attenuators with Pre/Post switches. Rear panel has four 3-pin connectors for inter-module bus chaining.291
Capabilities 4
- Auxiliary Send Busaux-send-bus
- Channels 1 and 2 have Aux Level attenuators with individual Pre/Post fader routing switches, creating an independent aux mix routed to a separate AUX OUT pair. Soft-clipping diodes on the Aux output stage.291
- Rear-Panel Bus Chainingbus-chaining
- Four rear 3-pin connectors (Chain In, Chain Out, Aux Chain In, Aux Chain Out) allow direct connection to compatible Intellijel cases and modules without patch cables. Two 3-pin cables included. Multiple units can be chained for larger mixes.291
- Soft Clippingsoft-clipping
- Main and Aux output stages each have soft-clipping diodes for peak management.291
- Stereo Mixerstereo-mixer
- 3-channel stereo mixer summing to main L/R outputs. Each channel has a Level attenuator, Mute switch, and activity LED. Left inputs normalled to right for mono sources.291
Jacks 10 — 6 in / 4 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (6) | |||
| CHANNEL IN L1 | audio | — | Left input for stereo channel 1. Normalled to the right input so a mono source is duplicated to both sides.291 |
| CHANNEL IN L2 | audio | — | 291 |
| CHANNEL IN L3 | audio | — | 291 |
| CHANNEL IN R1 | audio | — | Right input for stereo channel 1. Normalled from left input when nothing is inserted.291 |
| CHANNEL IN R2 | audio | — | 291 |
| CHANNEL IN R3 | audio | — | 291 |
| Outputs (4) | |||
| AUX OUT L | audio | — | Left output of the Aux mix bus, level set by AUX LEVEL controls on channels 1 and 2. Soft-clipping diodes prevent hard clipping. Overload LED indicator between the two jacks.291 |
| AUX OUT R | audio | — | Right output of the Aux mix bus. Soft-clipping diodes prevent hard clipping.291 |
| MIX OUT L | audio | — | Left main mix output. Level set by LEVEL and MUTE controls on all three channels. Soft-clipping diodes prevent hard clipping. Overload LED indicator between the two jacks.291 |
| MIX OUT R | audio | — | Right main mix output. Level set by LEVEL and MUTE controls on all three channels. Soft-clipping diodes prevent hard clipping.291 |
Parameters 4
| Name | Type | Range | Behavior |
|---|---|---|---|
| AUX LEVEL | knob | — | Attenuates the level of the channel's input signal routed to the Aux Mix. Available on channels 1 and 2 only. Behavior depends on PRE/POST switch setting.291 |
| LEVEL | knob | — | Attenuates the level of the channel's input signal routed to the Main Mix. Uses audio-grade logarithmic attenuators for smooth, even response.291 |
| MUTE | switch | — | Silences the channel at MIX OUT. For channels 1 and 2, if PRE/POST is set to POST, MUTE also silences the channel at AUX OUT.291 |
| PRE / POST | switch | — | When set to PRE, AUX LEVEL is independent of LEVEL and MUTE. When set to POST, LEVEL determines the attenuation range of AUX LEVEL and MUTE will silence the signal to AUX OUT.291 |
Firmware history 0 versions
No firmware history recorded.
References 2
-
[291]
Intellijel Aux Mix 1U Manual (2025.12.22)manual● verified 2026-05-08
-
[292]
Intellijel Aux Mix 1U product pageproduct_page⚠ verified 2026-05-08 · manufacturer changed since last verified