Performance signal switcher/router for Eurorack. Features four buffered inputs (normalised sequentially), a lower switching section with four dual-action toggle switches (latched up, momentary down), and an upper routing section with two rotary switches plus two dual-action toggle switches. Handles audio, CV, and gates/triggers.537
Capabilities 2
Signal Switchsignal-switch
Four buffered inputs with sequential normalisation; four toggle-switched outputs and two routed outputs allow manual switching and routing of any signal type (audio, CV, gate/trigger).537
Stereo Processingstereo-processing
Symmetric 4-switch layout handles stereo L/R pairs — route or mute both channels together.537
Jacks 10 — 4 in / 6 out
Name
Signal
Voltage
Description
Inputs (4)
Input A
mixed
—
First signal input. Normalised to inputs B, C, and D. Includes a +5 V normalisation when unpatched to allow easy manual gate creation.537
Selects one of the four input signals (A, B, C, or D) to route to Routing Output 1 via its paired toggle switch.537
Rotary Switch 2
switch
1 – 4
Selects one of the four input signals (A, B, C, or D) to route to Routing Output 2 via its paired toggle switch.537
Routing Toggle Switch 1
switch
—
Dual-action toggle switch for routing output 1. When active (up/down), passes the signal selected by Rotary Switch 1 to Routing Output 1; centre position interrupts the path.537
Routing Toggle Switch 2
switch
—
Dual-action toggle switch for routing output 2. When active (up/down), passes the signal selected by Rotary Switch 2 to Routing Output 2; centre position interrupts the path.537
Toggle Switch A
switch
—
Dual-action: latched upwards (signal passes to output), momentary downwards (signal passes while held), centre position interrupts the signal path.537
Toggle Switch B
switch
—
Dual-action: latched upwards (signal passes to output), momentary downwards (signal passes while held), centre position interrupts the signal path.537
Toggle Switch C
switch
—
Dual-action: latched upwards (signal passes to output), momentary downwards (signal passes while held), centre position interrupts the signal path.537
Toggle Switch D
switch
—
Dual-action: latched upwards (signal passes to output), momentary downwards (signal passes while held), centre position interrupts the signal path.537
Firmware history 3 versions
Version
Released
Notes
Rev D
—
Eliminated the possibility of glitches appearing on the routing outputs while turning the corresponding rotary switches.537
Rev C
—
Added +5 V normalisation on input A and output impedance compensation. Current draw increased from ±10 mA to ±25 mA.537