make-noise/erbe-verb
Erbe-Verb
A unique, modeless, continuously variable stereo algorithmic reverb with complete voltage control. Mono In, Stereo Out, all-analog dry path, 24-bit 48kHz DSP. Co-designed with Tom Erbe of Soundhack.561
Capabilities 1
- Stereo Reverbstereo-reverb
- Continuously variable algorithmic reverb with mono input and stereo output. All-analog dry path; wet path is 24-bit 48kHz 32-bit floating-point DSP.561
Jacks 14 — 11 in / 3 out
| Name | Signal | Voltage | Description |
|---|---|---|---|
| Inputs (11) | |||
| Absorb CV Input | cv | -5V to 5V | 561 |
| Decay CV Input | cv | -5V to 5V | 561 |
| Depth CV Input | cv | -5V to 5V | 561 |
| Mix CV Input | cv | 0V to 5V | 561 |
| Pre-Delay CV Input | cv | -5V to 5V | 561 |
| Reverse Gate Input | gate | ≥1.5V | Engages reverse reverb while gate is high (momentary). Requires at least 1.5V to operate.561 |
| Signal Input | audio | — | AC coupled audio input. Expects standard modular signal level of 10Vpp.561 |
| Size CV Input | cv | -5V to 5V | 561 |
| Speed CV Input | cv | -5V to 5V | 561 |
| Tempo Input | clock | ≥1.5V | Clock/gate input for synchronizing Speed and Pre-Delay to multiples or divisions of an external clock. Requires at least 1.5V amplitude and 6ms pulse width.561 |
| Tilt CV Input | cv | -5V to 5V | 561 |
| Outputs (3) | |||
| CV Output | cv | 0V to 10V | Envelope follower output representing average energy of the reverb algorithm. Goes higher as reverb signal gets louder. Useful for feedback patching into the system.561 |
| Left Output | audio | — | Left portion of stereo reverb image; also serves as mono reverb image. AC coupled, up to 10Vpp.561 |
| Right Output | audio | — | Right portion of stereo reverb image. AC coupled, up to 10Vpp.561 |
Parameters 13
| Name | Type | Range | Behavior |
|---|---|---|---|
| Absorb | knob | — | Controls both Diffusion and Damping. Full CCW: 0 Diffusion, 0 Damping. At 10:00: Full Diffusion, 0 Damping. Full CW: Full Diffusion, Full Damping. Increasing Absorb decreases decay time and makes reverb darker. Feedback-based, responds best to slow modulation.561 Zones
|
| Decay | knob | 0% – 120% | Unipolar control for reverb decay/tail length. 0–120% reflection gain; infinite self-oscillation at full CW. Feedback-based; slower to respond than Size or Pre-Delay. Responds best to slower control signals.561 |
| Decay CV Attenuverter | knob | — | Bipolar attenuverter for the Decay CV Input.561 |
| Depth | knob | — | Bipolar control for depth and type of internal modulation. Minimum modulation at 12:00 (noon). CCW from noon engages Cyclic (multiphase cascaded chorus) modulation; CW from noon engages Ergodic (random room dimension shifting) modulation. Shimmer at full CW.561 Zones
|
| Depth CV Attenuverter | knob | — | Bipolar attenuverter for the Depth CV Input.561 |
| Mix | knob | — | Blends between dry (unprocessed) analog signal and wet (processed) reverb signal. Acts as a standard panel control when nothing is patched to Mix CV Input; acts as an attenuator for the CV signal when something is patched.561 |
| Pre-Delay | knob | 7ms – 500ms | Controls delay before reverb reflections begin arriving. Independent of Size. Using internal clock: 7ms–500ms unipolar. Using external clock: bipolar with divisors/multipliers (1/12 to 12/1 of clock, with 1/1 at 12:00). Also sets Reverse buffer length. Can be synchronized via Tempo Input.561 |
| Reverse | button | — | Toggles reverse reverb on/off (playing Pre-Delay buffer backwards to create reverse reverberations). Can be toggled by panel button or momentarily engaged via Reverse Gate Input. Reverse time is set by Pre-Delay controls. Can be synced to external clock via Tempo Input.561 |
| Size | knob | 35cu ft – 9300000cu ft | Ultra-wide range control over the size of the virtual acoustic space, from unrealistically small (full CCW, 'coffin') to unrealistically large (full CW, 'heavens'). Typical settings: Coffin=full CCW, Room=12:00, Plate=1-2:00, Hall=3:00, Ambient=4:00, Heaven=full CW.561 Zones
|
| Size CV Attenuator | knob | — | Bipolar attenuator for the Size CV Input. Controls the amount and polarity of CV modulation applied to Size.561 |
| Speed | knob | 0.5cps – 256cps | Unipolar control for the rate of internal modulation. Using internal clock: 0.5–256 cps; using external clock: 1/48–9000 cps. At high speeds smooths aural response; at low speeds modulation is discernible as rhythmic chorusing/evolving/swirling. Note: with Depth at noon (zero modulation), Speed has no discernible effect.561 |
| Tilt | knob | — | Bipolar tone-shaping EQ applied after the reverb algorithm. Unity at 12:00. CCW: high end slightly cut, low end dramatically boosted (thick, thunderous). CW: low end cut, high end dramatically boosted (thin, bright). Low Gain: +12 to -12 dB; High Gain: -24 to +24 dB.561 |
| Tilt CV Attenuverter | knob | — | Bipolar attenuverter for the Tilt CV Input.561 |
Firmware history 1 version
| Version | Released | Notes |
|---|---|---|
| ev040 | — | 561 |
References 2
-
[561]
Make Noise / Soundhack Erbe-Verb Manualmanual● verified 2026-05-20
-
[562]
Make Noise Erbe-Verb product page (retired modules archive)product_page⚠ verified 2026-05-20 · manufacturer changed since last verified