Eurorack Reference / modules /make-noise/jumbler audit site v0.1 — milestone 3
make-noise/jumbler

Jumbler

Make Noise

A six-channel all-analog signal combiner and distributor with 36 VCAs arranged as a 6×6 matrix. Two macro controls — Rotate (cyclic routing permutation) and Radiate (diffusion into adjacent outputs) — reconfigure up to six input signals across six outputs with smooth crossfading transitions. Useful for waveform blending, gate/clock recombination, effects re-routing, and CV distribution.570

Capabilities 4

Matrix Mixermatrix-mixer
570
Mixermixer
Radiate control blends each input signal into adjacent outputs, enabling the module to function as a voltage-controlled scanning mixer.570
Signal Switchsignal-switch
At full CCW Radiate the module acts as a pure routing switch; Rotate selects which input feeds which output. Continuously variable Radiate allows smooth crossfading between routing states.570
Voltage-Controlled Amplifiervca
36 analog VCAs form every crosspoint in the 6×6 routing matrix.570

Jacks 14 — 8 in / 6 out

NameSignalVoltageDescription
Inputs (8)
Radiate CV Inputcv—570
Rotate CV Inputcv—570
Signal Input 1mixed—570
Signal Input 2mixed—570
Signal Input 3mixed—570
Signal Input 4mixed—570
Signal Input 5mixed—570
Signal Input 6mixed—570
Outputs (6)
Signal Output 1mixed—570
Signal Output 2mixed—570
Signal Output 3mixed—570
Signal Output 4mixed—570
Signal Output 5mixed—570
Signal Output 6mixed—570

Parameters 4

NameTypeRangeBehavior
Radiateknob—Sets how diffusely each input signal spreads into adjacent outputs. At full CCW each input is isolated to its own output. As Radiate increases, signal bleeds into neighboring outputs (outputs 1 and 6 are considered adjacent). At full CW each input's signal is present in every output. Rotate takes place prior to Radiate.570
Zones
Isolated
Full Spread
  • Isolated -100–-100%Each input signal occupies only its own output with no bleed into adjacent outputs.570
  • Full Spread 100–100%Each input's signal is present in every output simultaneously.570
Radiate CV Attenuverterknob—Bi-polar attenuverter for the Radiate CV input. Scales and optionally inverts the incoming CV before it modulates Radiate.570
Rotateknob—Selects the basic routing of inputs to outputs. At 12:00 (noon), Input 1 goes to Output 1, Input 2 to Output 2, etc. Turning CW shifts the routing so each input feeds the next lower-numbered output (cyclically). At full CW all outputs turn OFF. Rotating CCW from noon rotates outputs in the opposite direction. The output currently receiving Input 1 is indicated in blue.570
Zones
Noon (1:1 direct routing)
All Off (CW extreme)
  • Noon (1:1 direct routing) 0–0%Input 1 to Output 1, Input 2 to Output 2, … Input 6 to Output 6 — direct 1:1 routing.570
  • All Off (CW extreme) 100–100%All outputs are turned off; no signal reaches any output.570
Rotate CV Attenuverterknob—Bi-polar attenuverter for the Rotate CV input. Scales and optionally inverts the incoming CV before it modulates Rotate.570

Firmware history 0 versions

No firmware history recorded.

References 2

  1. [570]
    Make Noise Jumbler manualmanual
    source 570 canonical ↗ archived ↗
    ● verified 2026-05-20
  2. [571]
    Make Noise Jumbler product pageproduct_page
    source 571 canonical ↗ archived ↗
    ⚠ verified 2026-05-20 · manufacturer changed since last verified