Base Pattern |
button |
— |
— |
Determines where in the loop specific hits start playing as density is increased. There are 5 different base patterns. Changed by long pressing the encoder knob. [28] |
CHH |
menu_setting |
— |
— |
Closed hi hat voice control. [28] |
Density |
menu_setting |
— |
— |
Sets the total amount of hits that occur for a particular piece given the syncopation setting. [28] |
Energy |
menu_setting |
— |
— |
Macro control over kick, snare and tom densities and syncos. As energy increases, densities rise until the cursor turns red, at which point crash and kick are triggered at the beginning of each loop. Further increase biases synco towards 50-50. [28] |
Evolve |
menu_setting |
— |
— |
Turn the encoder to explore variations of the drum pattern. Turning counter-clockwise returns to the root rhythm. Short pressing randomizes variations. CV can also randomize variations when enabled by holding the speed encoder and pressing the evolve encoder; CV randomization triggers when evolve value exceeds 75%. [28] |
Length |
menu_setting |
2clock pulses – 32clock pulses |
— |
Sets the length of the loop from 2 to 32 clock pulses, displayed on the vertical LED strip in groups of 8. [28] |
OHH |
menu_setting |
— |
— |
Open hi hat voice control. [28] |
Speed |
menu_setting |
— |
— |
When no external clock is patched in, sets the internal clock speed. When an external clock is patched in, acts as a clock divider/multiplier up to 10x. [28] |
Swing |
menu_setting |
50% – 90% |
— |
Sets the placement of every second clock pulse from 50% (no swing) to 90% at maximum. [28] |
Synco |
menu_setting |
— |
— |
Sets the approximate ratio of non-syncopated and syncopated hits for a particular drum piece. [28] |
Tom Amount |
menu_setting |
— |
— |
Sets the number of available pitches for the tom to play, akin to how many different tom drums a drummer has available. [28] |