MPE enabled via options.txt (mpeena 1). Aftertouch mapped to filter cutoff and volume. Slide and other expressive dimensions assignable to CC parameters.637
Multitimbralmultitimbral
Each of the 8 voices can have a different engine, MIDI channel, and independent parameter set, grouped into parts.637
Polyphonic Synthesizerpolyphonic-synth
Up to 8 simultaneous voices, configurable into parts, each voice independently assigned to any of the available synthesis engines.637
Sample Playbacksample-playback
WAV Player engine supports mono/stereo samples at 16/24/32-bit, 44.1/48kHz, organized in up to 10 folders of 32 samples each. Polyphonic one-shot playback.637
Jacks 12 — 10 in / 2 out
Name
Signal
Voltage
Description
Inputs (10)
MIDI TRS
mixed
—
MIDI TRS input, compatible with both Type A and Type B wiring standards.637
Increases or decreases the duration of attack, decay and release of both AMP and MOD ADSR envelopes. Negative voltages make the sound pluckier; positive voltages create softer and longer sounds.637
filter CV
cv
-5V to 5V
Positive voltages increase the filter frequency cutoff; negative voltages decrease it.637
CV/Oct pitch input. The oct and freq knob parameters are combined with this input to determine the final pitch of the voices.637
part CV
cv
0V to 5V
Selects which part is affected by CV modulation (0–5V range divided equally across parts). Can alternatively be configured to select the active engine instead.637
Sets the attack time of the amplifier ADSR envelope.637
amp dr
knob
—
Sets the time of the Decay and Release stages of the amplifier ADSR envelope.637
chorus
knob
—
Secondary parameter. Sets the send amount to the Chorus FX engine. If the High Pass Filter is enabled in options.txt, this control sets the HP filter frequency instead (one per voice).637
f.env
knob
-100% – 100%
Sets the amount of the MOD ADSR envelope applied to the filter frequency. Bipolar: at 12 o'clock it is 0%, fully CW is 100%, fully CCW is -100%.637
Rough0–100%Operator 2 modulates its own phase — rough character.637
noise
knob
—
Secondary parameter. Controls the level of the white noise internal source. Not affected by the voice level, providing an independent noise source. If Delay is enabled, this control instead sets the delay send amount.637
oct
knob
—
Sets the base octave of the sound. Acts as an offset of the input MIDI note or CV pitch input.637
pan
knob
—
Secondary parameter. Sets the stereo pan using a constant power pan law.637
space
knob
—
Secondary parameter. Sets the send amount to the Space (reverb) FX engine.637
sust
knob
—
Sets the sustain level of both the amplifier and the modulation ADSR envelopes.637
timbre
knob
—
Second parameter of the engine. In the Wav Player engine, selects the sample.637